Single Row Angular Contact

Contact Now

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. We can preload the bearings at the factory so that the correct load will develop once the bearing is put into service.SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

Single Row Angular Contact Ball Bearings The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads. Single-row bearings handle thrust loads on one side.Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading.

 

Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.

 

10mm x 30mm x 9mm SKF 7200becbp-skf Single Row Angular Contact

75.000 mm 6000 rpm
24200 N 105.0000 mm

10mm x 30mm x 9mm FAG 7200-b-jp-uo-fag Single Row Angular Contact

140.000 mm 95600 N
110000 N 0.60 mm

10mm x 30mm x 9mm FAG 7200-b-jp-ua-fag Single Row Angular Contact

0.6 mm 3 mm
72.5 mm 2.2

95mm x 170mm x 32mm NSK 7019am-nsk Single Row Angular Contact

HMV 34 E 33 mm
220 mm M 170x3

1.5 Inch x 3.25 Inch x 0.75 Inch R%26M ljt1.1/2-r&m Single Row Angular Contact

16000 rpm 14.00 mm
6550 N 17.000 mm

1.375 Inch x 3.5 Inch x 0.875 Inch RHP mjt1.3/8-rhp Single Row Angular Contact

385 mm 0.6
0.2 6.5 mm

1.375 Inch x 3.5 Inch x 0.875 Inch R%26M mjt1.3/8-r&m Single Row Angular Contact

150.000 mm 1.00 mm
520000 N 351000 N

70mm x 110mm x 20mm NSK 7014bm-nsk Single Row Angular Contact

42 min 6307  
71 max 10 000 min-1

70mm x 110mm x 20mm NSK 7014am-nsk Single Row Angular Contact

2154.6 g SNP 3048x9
749.3 mm 334 kN

15mm x 35mm x 11mm FAG 7202-b-jp-uo-fag Single Row Angular Contact

53000 N 3.750 in
47500 N 4500 rpm

1.375 Inch x 3 Inch x 0.688 Inch RHP ljt1.3/8-rhp Single Row Angular Contact

20000 r/min 9.3 mm
120.7 mm 1.07

1.375 Inch x 3 Inch x 0.688 Inch R%26M ljt1.3/8-r&m Single Row Angular Contact

2.00 mm 4.7 mm
70.9 mm 12000 rpm
1/9